NBS Specification Clauses

To complete the clause, select the appropriate wording from below. Highlighted text can be ‘dragged and dropped’ to save typing.

E41 WORKED FINISHES TO IN SITU CONCRETE
40 TROWELLED FINISH FOR WEARING SURFACES

Conren Floorplate Industrial Floor Surfacing

A dry dress application directly onto freshly laid concrete bases, to produce an exceptionally hard-wearing monolithic, heavy duty floor surface and designed for warehousing, heavy engineering, loading bays, production areas, and multi-storey car park decks.

Various grades of Floorplate are available depending on site requirements, including those areas exposed to wet conditions: contact Conren for further information. Conren will carry out site surveys and offer technical advice on the use and performance of all Conren products.

Consult Conren Ltd’s technical literature for details. Conren Ltd can also provide a design and specification service and it is recommended that they be consulted early in the design process.

NBS clause E41/40 is not wholly appropriate for the specification of Floorplate. Create an amended clause and insert the text below.

Dry shake manufacturer: Conren Limited, Redwither Road, Wrexham Industrial Estate, Wrexham, LL13 9RD. Tel: 01978 661 991. Fax: 01978 661 120. Email: info@conren.com Web: www.conren.com Technical Sales Department - Tel: 01978 668 130. Export enquiries - Tel; 01978 668133
Product reference: Floorplate
Mix: 2:1 Floorplate to ordinary Portland cement
Colour: Consult with Conren Ltd.
Application of dry shake: At appropriate stages during floating and before trowelling, sprinkle evenly at rate of
Floorplate 2 kg/m2. – for light industrial/warehouse applications.
Floorplate 3 - 5 kg/m2. – for medium industrial/warehousing, loading areas and ramps etc.
Floorplate 5 kg/m2. – for medium/heavy industrial areas (aircraft hangers, machine shops, garages, bottling plants etc.). N.B. To be mixed 2:1 ratio Floorplate : OPC
Sealer: Conren CS2 Cure & Seal or Lapidolith - Consult with Conren Ltd for recommendations and details.

Conren Lapidolith

A clear water based liquid reactive case hardener and dustproofer for improving the wear and protection of new or aged concrete and terrazzo floors. Designed for use on either monolithic or separate construction flooring, Lapidolith is a low-cost option for treating commercial warehousing and terrazzo flooring in retail outlets.

Conren will carry out site surveys and offer technical advice on the use and performance of all Conren products. A maintenance range of products is available for end user application.

Consult Conren Ltd’s technical literature for details. Conren Ltd can also provide a design and specification service and it is recommended that they be consulted early in the design process.

NBS clause E41/40 is not wholly appropriate for the specification of Lapidolith. Create an amended clause and insert the text below.

40A TROWELLED FINISH FOR WEARING SURFACES

Manufacturer: Conren Limited, Redwither Road, Wrexham Industrial Estate, Wrexham, LL13 9RD. Tel: 01978 661 991. Fax: 01978 661 120. Email: info@conren.com Web: www.conren.com Technical Sales Department - Tel: 01978 668 130. Export enquiries – Tel: 01978 668133
Product reference: Lapidolith
Preparation: Clean cured concrete to remove dirt, grease, oil and other surface contaminants.
Application: 2 / 3 applications with Lapidolith diluted with water and applied in accordance with Conren Ltd written instructions.
Solutions and wash water: Do not discharge to drains. Store and dispose of it safely.