A water based epoxy coating for walls and floors such as plant rooms and food preparation areas. Low odour and taint free, WRAS approved for use with potable water and with a Class 1 Fire Rating, Aquasol is easy to apply, offering a tough, decorative, wipe clean finish.
For more information on this product please download the datasheet(s) below:
Click on the section below to read further information.
To complete the clause, select the appropriate wording from below. You can highlight the text to copy and paste it into your documents to save typing.
M12 RESIN FLOORING
10 RESIN FLOORING:
A high performance, water based, epoxy resin protective coating designed for floors, walls and ceilings. Aquasol is a low odour product and safe to use in confined spaces, near foodstuffs and in fire hazard areas. It is designed for use in pharmaceutical, food and beverage processing plants and other areas where strict hygiene demands a clean room environment.
Where non-slip coatings are required, Conren Stopslip aggregate may be incorporated into the system.
Colours: 8 standard colours are available. Other colours can be formulated on request, from both the BS4800 and RAL colour groups. Certain non-standard colours may be subject to a minimum order quantity or surcharge.
Where a higher level of durability is required, a heavy duty Aquasol HD option is recommended.
Conren recommend mechanical preparation for most substrates prior to installation of epoxy resin coatings/screeds and offer a range of primer systems to suit most situations.
Where the moisture content in a new concrete slab exceeds 75% RH, e.g. in fast track construction projects, Conren WD Aquatect, water vapour suppressant/primer should be used. Consult Conren for recommendations and details.
Existing surfaces must be clean, dry and free from contamination which can prevent the effective adhesion of coatings and screeds. For heavily oil contaminated surfaces, the concrete should be shotblasted and subjected to hot compresses air (HCA) followed by a holding primer of WD Bonder or WD Aquatect. Consult with Conren for full details.
Conren also produce Flexijoint, a joint system to suit all manner of construction methods, including crack induced/sawn joints and pre-formed expansion joints as well as coved skirting details and other finishing requirements.
Conren will carry out site surveys and offer technical advice on the use and performance of all Conren products. A maintenance range of products is available for end user application.
Consult Conren Ltd technical literature for details. Conren Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.
10 RESIN FLOORING:
As clauses 230 and 240. Consult Conren for additional advice on preparing contaminated surfaces or dealing with fast track application on new concrete.
Resin flooring system:
Manufacturer: Conren Limited, Unit 1, The Bridge Business Centre, Ash Road South, Wrexham Industrial Estate, Wrexham LL13 9UG. Tel: 01978 661 991 Fax:01978 664 664.
Apply 1 coat of Aquasol by brush or roller after recommended surface preparation.
Apply 1 coat of Aquasol HD by brush or roller after recommended surface preparation.
Resin flooring reference:
1 or 2 coats of Aquasol applied by brush or roller
Dependent upon substrate – consult with Conren for recommendations.
1 coat of Aquasol HD applied by brush or roller
Nominal thickness: Consult with Conren Ltd for recommendations and details.
Colour: Light Grey / Dark Grey / Light Stone / Tile Red / Light Green / Mid Green / Cream / Arctic Blue / White* / Magnolia* / Buttermilk* - * Not available in Aquasol HD
Surface finish/treatment: Not applicable
Resin skirtings/upstands: Consult with Conren for recommendations and details.