Conren

Products

Decktect - Flexible Car Park System

Decktect - Flexible Car Park System

Specifically designed as a flexible waterproofing solution for exposed car park top decks, Decktect accommodates normal substrate movement, providing an impervious finish for heavily trafficked areas.

Datasheeets

For more information on this product please download the datasheet(s) below:

 Decktect Base Coat Datasheet
 Decktect Top Coat Datasheet
 Decktect Aggregate Holding Coat Datasheet


NBS BIM
Click here for NBS BIM Information


NBS Specifications

NBS Plus

Click on the section below to read further information.

 

+ / -M12 RESIN FLOORING (Click here for full specification)

To complete the clause, select the appropriate wording from below. You can highlight the text to copy and paste it into your documents to save typing.

M12 RESIN FLOORING
10 RESIN FLOORING:

Conren Decktect PU

An impervious and very hard-wearing, low maintenance, non-slip surface waterproofing membrane designed for car park decks, pedestrian walkways and vehicle access floors. The coating is flexible and accommodates normal substrate movement without cracking.

Colours: 9 standard colours are available to provide demarcation of pedestrian zones, car parking bays and safety aisles. Other colours can be formulated on request, from both the BS4800 and RAL colour groups. Certain non-standard colours may be subject to a minimum order quantity or surcharge. Product colour samples are available on request from the Technical Sales Department.

Conren will carry out site surveys and offer technical advice on the use and performance of all Conren products.

Consult Conren Ltd technical literature for details. Conren Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

10 RESIN FLOORING: TO CAR PARK DECKS

Preparation:
All substrates to be sound and free from contamination with oil, grease and other matter, removed by grinding, scabbling or shotblasting. Excessive laitance to be removed by vacuum blasting, grinding or light scabbling.

New concrete or cementitious substrates to have been placed for minimum 28 days and give Protimeter reading of less than 80% RH.

Steel substrate to be cleaned to bright metal finish by grinding or shotblasting to S.A. 2.5.

Resin flooring system:

Manufacturer: Conren Limited, Unit 1, The Bridge Business Centre, Ash Road South, Wrexham Industrial Estate, Wrexham LL13 9UG. Tel: 01978 661 991 Fax:01978 664 664.

Primer reference:
Deckprime to concrete substrate.
Two-pack epoxy zinc primer to steel substrate.
Allow primer to become tack free before applying base coat

Resin flooring reference: Conren Decktect PU

Application: Consult with Conren Ltd for recommendations and details.

Colour: Light Grey / Dark Grey / Light Stone / Tile Red / Light Green / Mid Green / Cream / Arctic Blue / Conren Blue

Surface finish/treatment: Decktect aggregate broadcast onto wet top coat and allow to cure.

Resin skirtings/upstands: Consult with Conren Ltd for recommendations and details.


< Back