This blend of quartz aggregate and high performance resin produces a highly decorative screed, which is both tough and versatile. Usually laid at 4mm thick, Decorscreed offers designers the practical qualities of a screed, without compromising on aesthetics.
For more information on this product please download the datasheet(s) below:
Click on the section below to read further information.
To complete the clause, select the appropriate wording from below. You can highlight the text to copy and paste it into your documents to save typing.
M12 RESIN FLOORING
10 RESIN FLOORING:
A carefully selected blend of solvent-free epoxy resins, curing agents and graded coloured quartz aggregates providing a 4mm thick decorative, hard-wearing, impact and abrasion resistant floor surface. The screed is seamless, lightly textured and slip-resistant, designed for use in a wide range of industrial and commercial environments.
Colours: 8 standard colours are available. Non-standard mix designs can be supplied to suit the aesthetic requirements of individual projects. Certain non-standard colours may be subject to a minimum order quantity or surcharge.
Conren recommend mechanical preparation for most substrates prior to installation of epoxy resin coatings/screeds and offer a range of primer systems to suit most situations.
Where the moisture content in a new concrete slab exceeds 75% RH, e.g. in fast track construction projects, Conren WD Aquatect, water vapour suppressant/primer should be used. Consult Conren for recommendations and details.
Existing surfaces must be clean, dry and free from contamination which can prevent the effective adhesion of coatings and screeds. For heavily oil contaminated surfaces, the concrete should be shotblasted and subjected to hot compresses air (HCA) followed by a holding primer of WD Bonder or WD Aquatect. Consult with Conren for full details.
It is important that movement joints are incorporated throughout the entire floor system and Conren also produce Flexijoint, a joint system to suit all manner of construction methods, including crack induced/sawn joints and pre-formed expansion joints as well as coved skirting details and other finishing requirements.
Conren will carry out site surveys and offer technical advice on the use and performance of all Conren products.
Consult Conren Ltd technical literature for details. Conren Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.
10 RESIN FLOORING:
Preparation: As clauses 230, 240 and 310. Consult Conren for additional advice on preparing contaminated surfaces or dealing with fast track application on new concrete.
Resin flooring system:
Manufacturer: Conren Limited, Unit 1, The Bridge Business Centre, Ash Road South, Wrexham Industrial Estate, Wrexham LL13 9UG. Tel: 01978 661 991 Fax:01978 664 664.
Primer reference: Decorprime Primer
Resin flooring reference: Decorscreed
Application: Consult with Conren Ltd for recommendations and details.
Nominal thickness: 4mm / 6mm
Colour: Russet / Corn / Brick / Forest / Sky / Smoke / Midnight / Lawn
Resin skirtings/upstands: Consult with Conren Ltd for recommendations and details.