Conren

Products

Enamelcoat UV – Chemically Resistant Aspartic Coating

Enamelcoat UV – Chemically Resistant Aspartic Coating

Enamelcoat UV is a fast curing, tough, chemically resistant, easily cleaned high gloss coating, which offers long term UV stability for areas exposed to sunlight.

Datasheeets

For more information on this product please download the datasheet(s) below:

 Enamelcoat UV Datasheet


NBS BIM
Click here for NBS BIM Information


NBS Specifications

NBS Plus

Click on the section below to read further information.

 

+ / -M12 RESIN FLOORING (Click here for full specification)

To complete the clause, select the appropriate wording from below. You can highlight the text to copy and paste it into your documents to save typing.

M12 RESIN FLOORING
10 RESIN FLOORING:

Conren Enamelcoat

A range of solvent-free, high-build coatings designed for heavy industrial use and refurbishment projects in virtually any industry where floors and walls need to be both protected and decorative in appearance. The coatings are fast curing, easy to clean and maintain and are chemically resistant.

Where non-slip coatings are required, Conren Stopslip aggregate may be incorporated into the system: see technical information in this section. The coatings can also be reinforced with a fibre reinforced epoxy resin laminate to provide a high strength chemical resistant system.

Colours: 9 standard colours are available. Other colours can be formulated on request, from both the BS4800 and RAL colour groups. Certain non-standard colours may be subject to a minimum order quantity or surcharge.

Conren recommend mechanical preparation for most substrates prior to installation of epoxy resin coatings/screeds and offer a range of primer systems to suit most situations.

Where the moisture content in a new concrete slab exceeds 75% RH, e.g. in fast track construction projects, Conren WD Aquatect, water vapour suppressant/primer should be used. Consult Conren for recommendations and details.

Existing surfaces must be clean, dry and free from contamination which can prevent the effective adhesion of coatings and screeds. For heavily oil contaminated surfaces, the concrete should be shotblasted and subjected to hot compresses air (HCA) followed by a holding primer of WD Bonder or WD Aquatect. Consult with Conren for full details.

Most epoxy and polyurethane systems can be applied to timber surfaces, metal structures and other substrates.

Conren produce Flexijoint, a joint system to suit all manner of construction methods, including crack induced/sawn joints and pre-formed expansion joints as well as coved skirting details and other finishing requirements.

Conren will carry out site surveys and offer technical advice on the use and performance of all Conren products. A maintenance range of products is available for end user application.

Consult Conren Ltd technical literature for details. Conren Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

10 RESIN FLOORING:

Preparation: As clauses 230 and 240. Consult Conren for additional advice on preparing contaminated surfaces or dealing with fast track application on new concrete.

Resin flooring system:

Manufacturer: Conren Limited, Unit 1, The Bridge Business Centre, Ash Road South, Wrexham Industrial Estate, Wrexham LL13 9UG. Tel: 01978 661 991 Fax:01978 664 664.

Primer reference:
1 coat of Aquasol, brush or roller appled.
Resin flooring reference:
2 coats of Enamelcoat, brush or roller applied

Reinforcement: Conren Glass Reinforcing System incorporating 2 coats of wetting resin and glass fibre.

Nominal thickness: Consult with Conren Ltd for recommendations and details.

Colour: Light Grey / Dark Grey / Light Stone / Tile Red / Light Green / Mid Green / Cream / Arctic Blue / Conren Blue

Surface finish/treatment: Not applicable

Resin skirtings/upstands: Consult with Conren Ltd for recommendations and details.


< Back