Levelay HDT is a flow applied, hardwearing epoxy resin screed usually laid at a thickness of 4mm. The textured finish offers additional slip resistant properties, ideal for both pedestrian and vehicle traffic in a wide range of industrial and commercial environments.
For more information on this product please download the datasheet(s) below:
Click on the section below to read further information.
To complete the clause, select the appropriate wording from below. You can highlight the text to copy and paste it into your documents to save typing.
M12 RESIN FLOORING
10 RESIN FLOORING:
An anti-slip, self smoothing and seamless epoxy resin decorative screed that is easily maintained and is 100% impervious. Designed for food and beverage, dairy, chemical, pharmaceutical, electronics, automotive, aerospace and nuclear power industries where aesthetics have to be matched with hygiene and cleanliness.
Three grades are available:
Levelay HD - Standard grade.
Levelay Antistat - Recommended to control the problem of static electricity discharge in sensitive areas such as computer suites, electronic assembly and storage plants, laboratories and hospitals, and flammable storage zones.
Levelay HDT - A textured version designed for the more hazardous working environment, where liquid processes and occasional spillages increase potential safety problems. The textured screed combines high performance non-slip properties with permanency and durability.
Application thickness: 2 to 6mm.
Colours: 9 standard colours are available. Other colours can be formulated on request, from both the BS4800 and RAL colour groups. Certain non-standard colours may be subject to a minimum order quantity or surcharge.
Conren recommend mechanical preparation for most substrates prior to installation of epoxy resin coatings/screeds and offer a range of primer systems to suit most situations.
Where the moisture content in a new concrete slab exceeds 75% RH, e.g. in fast track construction projects, Conren WD Aquatect, water vapour suppressant/primer should be used. Consult Conren for recommendations and details.
Existing surfaces must be clean, dry and free from contamination which can prevent the effective adhesion of coatings and screeds. For heavily oil contaminated surfaces, the concrete should be shotblasted and subjected to hot compresses air (HCA) followed by a holding primer of WD Bonder or WD Aquatect. Consult with Conren for full details.
It is important that movement joints are incorporated throughout the entire floor system and Conren also produce Flexijoint, a joint system to suit all manner of construction methods, including crack induced/sawn joints and pre-formed expansion joints as well as coved skirting details and other finishing requirements.
Conren will carry out site surveys and offer technical advice on the use and performance of all Conren products.
Consult Conren Ltd technical literature for details. Conren Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.
10 RESIN FLOORING:
Preparation: As clauses 230, 240 and 310. Consult Conren for additional advice on preparing contaminated surfaces or dealing with fast track application on new concrete.
Resin flooring system:
Manufacturer: Conren Limited, Unit 1, The Bridge Business Centre, Ash Road South, Wrexham Industrial Estate, Wrexham LL13 9UG. Tel: 01978 661 991 Fax:01978 664 664. Email: email@example.com Web: www.conren.com
Primer reference: Consult with Conren Ltd for recommendations and details.
Resin flooring reference: Levelay HD / Levelay Antistat / Levelay HDT
Application: Consult with Conren Ltd for recommendations and details.
Nominal thickness: 2 - 6mm
Colour: Light Grey / Dark Grey / Light Stone / Tile Red / Light Green / Mid Green / Cream / Arctic Blue / Conren Blue.
Resin skirtings/upstands: Consult with Conren Ltd for recommendations and details.